Brand: Outai Optics

Series: Prism series

Type: Splitting prism

Beam splitting prism A film is plated on the inclined surface of the right Angle prism, and then a same right Angle prism is glued to form a cubic beam splitting prism. The astigmatism of the plate spectroscope can be avoided, and the coating is not directly exposed, which is not easy to damage and corrosion. When transmitting light, the beam splitting prism has no influence caused by light deflection, so there is no beam translation, ghost image and interference. For spectroscopy and imaging. Long calibration time is not required at 45° incidence. When the light is incident on the vertical incidence plane, the outgoing light is divided into two polarized beams. Where P light is transmitted light and S light is reflected light. The original proportional relationship between horizontal polarization and vertical polarization in the incident years can be maintained equally after the beam splitting prism.

Projector, optical instrument, fingerprint instrument, alignment instrument, rangefinder, image finder, mechanical sight, solar converter, rangefinder, erecting telescope, laser treatment equipment, laser measuring system, etc